Product ID:HYSOL RE2038
MSDS Date:08/18/1989
FSC:8040
NIIN:00-779-4704
MSDS Number: BQDLW

DEXTER ELECTRONIC MATERIALS; THE DEXTER CORP

211 FRANKLIN ST.
OLEAN, NY 14760
US

Emergency Phone: 716-372-6309

Info Phone: 716-372-6300

Preparer: JAMES P HORNBURG

Cage: 04347

DEXTER CORP THE DEXTER ELECTRONIC MATERIAL DIV

OLEAN, NY 14760-1297 US

Telephone: 716-372-6300/6309

Cage: 04347

EPOXY RESIN (NON HAZARDOUS--RESIN CONTAINS TRACE OF

CAS: 25068-38-6

Fraction By Weight: 88.000%

1,2-EPOXY-3-BUTOXY PROPANE (SARA III) (CALIFORNIA PROP

CAS: 2426-08-5

Fraction By Weight: 12.000%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:SKIN: IRRITATING ON PROLONGED/REPEATED
CONTACT, SKIN SENSITIZATION. EYES: IRRITATING. UNLIKELY THAT NORMAL
WORK OPERATIONS COULD PRODUCE AIRBORNE CONCENTRATIONS (ECH)
APPROACHING PEL, BUT REPORTED TO PRODUCE CANCER IN ANIMALS &
MUTAGENIC CHANGES IN BACTERIAL & CULTURED HUMAN CELLS. RESPIRATORY
PASSAGES-MILD IRRITATION.
Explanation of Carcinogenicity:THERE IS WEAK EVIDENCE THAT EXPOSURE TO
EPICHLOROHYDRIN POSES A CANCER RISK TO HUMANS.

First Aid:EYE: FLUSH W/WATER 15 MIN HOLDING EYELID OPEN. GET MED AID.
SKIN: REMOVE CONTAM CLOTHES & SHOES, WIPE OFF EXCESS. WASH W/SOAP &
WATER. IF IRRIT OCCURS, GET MED AID. INHAL: REMOVE TO FRESH AIR,
PROVIDE OXYGEN IF BREATHING DIFFICULT. GIVE ARTIF RESPIRATION IF
NOT BREATHING. GET MED AID. INGEST: DONT INDUCE VOMIT, IF VOMIT
OCCURS, KEEP HEAD BELOW HIPS (PREVENT ASPIRATION OF LIQ TO LUNG).
GET MED AID.

Flash Point Method:CC
Flash Point:155F,68C
Lower Limits:.4
Upper Limits:1.3
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL FOR SMALL FIRES. FOAM
FOR LARGE FIRES.
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:CLEANUP AND DISPOSAL SHOULD BE IN ACCORDANCE
WITH FEDERAL, STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Handling and Storage Precautions:MAY CAUSE SKIN SENSITIZATION & OTHER
ALLERGIC RESPONSES
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION, PARTICULARLY IF
HEATED OR SPRAYED. AVOID CONTACT WITH SKIN OR EYES.

Respiratory Protection:AIR SUPPLIED MASK IN CONFINED AREAS.
Ventilation:LOCAL EXHAUST PREFERRED; MECHANICAL (GENERAL) ACCEPTABLE
Protective Gloves:PLASTIC OR RUBBER
Eye Protection:SAFETY GLASSES OR GOGGLES
Other Protective Equipment:SAFETY SHOWER AND EYE BATH. USE COVERALLS OR
APRON TO PROTECT AGAINST SKIN AND CLOTHING CONTAMINATION.
Work Hygienic Practices:DO NOT REUSE CLOTHING UNTIL CLEANED. LEATHER
ARTICLES INCLUDING SHOES CANNOT BE DECONTAMINATED, SHOULD BE
DESTROYED.
Supplemental Safety and Health

Boiling Pt:B.P. Text:284F,140C
Vapor Pres:2 @ 20C
Vapor Density:3.8 @ 25C
Spec Gravity:1.14
Evaporation Rate & Reference:>1
Solubility in Water:<1%
Appearance and Odor:AMBER LIQUID, SWEET, PLEASANT ODOR, LOW VISCOSITY
Percent Volatiles by Volume:15

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, AMINES, MERCAPTANS, BASES
Stability Condition to Avoid:NONE
Hazardous Decomposition Products:CARBON MONOXIDE, ALDEHYDES, OTHER
ORGANICS
Conditions to Avoid Polymerization:EXOTHERMS WHEN CURED

Waste Disposal Methods:DISPOSAL SHOULD BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.